JUKI RS-1XL chip mounter SMT Pick and Place Machine price

Pick and Place Machine
  1. The RS-1XL SMT Pick and Place Machine combines the advantages of the RS-1 and RS-1R with the possibility of assembling printed circuit boards up to 560 mm wide (for comparison RS-1 / RS-1R: max. Width 370 mm).
  2. With slightly larger dimensions than a RS-1, the RS-1XL offers the same advantages: fast assembly of the smallest chips (0201 metric) to large components of 50 x 150 mm or 74 mm edge length for square components.
  3. The machine combines the properties of a SMT Pick and Place Machine with a mounter for large components.
  4. There is no need to purchase a special pick and place machine type.

Get A Free Quote

Share to

Board size max. 650 mm × 560 mm (single clamping)
Component height 25 mm
Component size 0201*2 (metric) ~ 74 mm / 50 × 150 mm
Placement Rate Optimum 42,000 CPH
IPC9850 29,000 CPH
Accuracy of pick and place machine ± 0.035 mm (Cpk ≥ 1)
Feeder inputs max. 112*2
Power supply 200 ~ 415 VAC, 3-phase
Apparent power 2.2 kVA
Operating air pressure 0.5 ± 0.05 Mpa
Air consumption max. 50 L/min
Dimensions(WxDxH) of pick and place machine 2,109 × 2,000 × 1,440 mm
Mass(approximately) 1,850 kg
others When using RF Feeder Series on front and rear.(Optional)

Message

Message
Looking for a sales representive or technical supports?