E-FLOW-Z lead-free wave automatic solder machine (left-right) Automatic solder machine for DIP plugin production line

automatic solder machine
  1. SunzonTech automatic solder machine use hot air and infrared mix heating system which can increase the speed and the uniformity of heating.
  2. This automatic solder machine has lots of advantage such as flux saving, quick response, easy coding and easy operation.
  3. Use a nitrogen device, control the speed of the wave soldering, reduce the deviation, reduce the contact area, shorten the movement path, and adjust the width to reduce the generation of oxides.

Get A Free Quote

Share to

Conveyor device Linkage type in board connection, aluminum guide rail, stainless steel chain drive.
Transfer system 1. Automatic solder machine equipped with heavy-duty double-hook claws, anti-deformation structure design of aluminum alloy rails;
2. Manually adjust the width of the substrate;
3. Adjustable conveying angle, equipped with digital angle display;
4. The transportation speed is controlled by frequency converter and stepless speed regulation.
Tin stove system 1. The inner pot of the tin furnace is made of special cast iron with anti-corrosion treatment on the surface;
2. Direct connection motor drive wave crest, frequency conversion speed regulation;
3. Tin slag diversion and oxide reduction device;
4. Manual control of tin furnace entry and exit and lifting movement;
5. External heating device,
6. PID temperature control mode and liquid low level alarm.
Spray system 1. Use independent external spray.
2. Modular design and spray movement is controlled by stepping motor;
3. Spray is automatic adjusted by the PCB length.
4. Digital setting of the spray width and speed.
5. Use a pressure gauge fine-tuning device to adjust the spray flow and spray particle size.
6. The constant pressure device supplies flux, flux liquid level alarm and automatic addition of flux.
7. Strong exhaust.
8. Filtration system
9. Equipped with isolation air knife;
Pre-heating system 1. Modularity and energy-saving design
2. Three sections micro-hot air cycle heating, higher thermal efficiency and more uniform temperature.
3. Three temperature zone, the length of the preheating zone is 1.8m.
4. PID temperature control mode.
Cooling system Strong natural wind cooling up and down.
Claw washing device Special brush cleaning.
Control system PC+PLC control system. Chinese/English operate interface, data storage function.
Automatic solder machine Technical configuration
PCB size 50~350mm(W)*120mm(H)
Transfer height 750±20mm
Transfer speed 500~1800mm/Min.
Transfer angle 4~7º
Transfer direction Left to right
Flux capacity Approx.18L
Spray exhaust 380V AC 750W.
compressed air 4~6Bar. 100L/min.
Pre-heating temperature Max.200℃
Tin oven temperature Max.300℃
Tin oven capacity Approx.480Kg
Wave height Approx.12mm
Equipment dimension: 5050(L)*1420(W)*1750(H)mm
Weight Approx.1850Kg
Power supply Triphase 380VAC 50Hz
Total power Approx.33KW
Running power Approx.8KW

Message

Message
Looking for a sales representive or technical supports?