Share to
No. | Items | Specifications and Materials | Q'ty |
1 | belt lines specification | Specification: (L)17700*(W)700*(H)2000±20㎜; Workbench high: 750±30MM; | 17.7m |
2 | Drive system | Machine head is welded with 50*50MM iron, outer equiped with iron plate and surface spray treatment, | 2units |
The two sides are automatic assembly conveyor lines, and the middle is the tooling board return line | |||
The drive system uses 2HP Taiwan "Taibang" gear reducer motor, and the inverter uses 2HP Taiwan "Aideli" stepless adjustable frequency converter, speed 0-15m/min; | |||
3 | Fuselage structure | Bracket is made of 50×50*2.0MM aluminum materials; | 35m |
Guide rail is made of 118×100MM special double speed chain guide rail; | |||
Lamp bracket is welded with 50×50*2.0MM; | |||
The transmission chain adopts "2060" triple speed chain produced by Suzhou Special Chain Factory | |||
4 | Power supply | The lower part of assembly line belt lines is equipped with a multi-function socket. The wire uses a 6-square multi-core "Jinhuanyu" wire with 1 "Bull" brand per meter. The wire groove is made of galvanized sheet and the size is 60×80×0.8 mm; | 34units |
5 | Lighting system | The lighting system is located above the work station, using 18W LED single hood bracket with LED lamp, | 28units |
6 | Air system | The main air pipe adopts 6 points galvanized pipe, each station is equipped with a set of quick connector, | 28units |
7 | Wind batch chute | Aluminum alloy wind chute and small plastic trolley | 28units |
8 | Hoist | Whole body is made of 3MM flat steel welding, and the surface is sprayed with powder. | 6units |
Lifting action adopts cylinder lifting, with solenoid valve, | |||
The transmission power adopts 120W Taiwan "VTV" conjoined motor, driving two 50MM wide anti-skid belts. | |||
9 | Blocker | Control blocker: QX-2 with buffer single acting cylinder, solenoid valve control | 4units |
Station blocker: QX-2 with buffer single-acting cylinder, equipped with manual control valve control | 24units | ||
10 | Electrical control system | Adopt Panasonic PLC centralized control mode | 1unit |
PLC adopts Japanese "Panasonic" | |||
The main switch uses "Zhengtai" | |||
The leakage switch adopts "Zhengtai" | |||
Travel switch adopts "Omron" | |||
AC contactor adopts "Zhengtai" contactor | |||
The relay adopts Japanese "Omron" relay | |||
"Zhengtai" power supply, running indicator | |||
11 | Tooling board | Specification: L700MM*W700MM*T25M | 24units |
The tooling board adopts 25M thick plywood, with green antistatic rubber on the front, fireproof board on the bottom, and a notch on the two sides of the 700 MM direction, and the "T" strip |