Transportation: Input board directly. Stainless steel chain conveyor, durable and special design for aluminum alloy track. Applied floating track for different stages for preventing deformation.
Preheating system: Drawar-type energy-saving design, IR preheating, PID mode temperature control, temperature control accuracy can reach ±2°C, the temperature dropping is ≦5° between preheating zone and soldering zone.
Flux spraying system: Managed by digital control. The motion of the spray nozzle Is controlled by stepper motor. Flux supply Is controlled automatically for optimized effect Exhausting and filter system installed on the top.
The solder pot is made by cast iron with anti-corrosion ceramic coating equipped with two low flow rate nozzles.
Forced air cooling system.
PC+PLC control system, Windows 7 operating system, Chlnese/English operation Interface, process proflle/data automatic storage function, lower or higher flux level alarm; lower tin level alarm.
|Model NO ||ETS-300 solder dip machine |
|Dimension of solder dip machine: L×W×H(mm) ||3550*1240*1540 |
|Weight of solder dip machine ||Approx.1500kg |
|Power Supply ||3PH 380V 50HZ |
|Start up Power ||28KW |
|Operation Power Consumption ||7KW |
|Control System ||PC+PLC |
|Spraying movement ||Step motor |
|Spray Pressure ||0.2Mpa-0.4Mpa |
|Flux Flow Arrange ||Option |
|Auto Fill Flux ||Standards |
|Exhaust ||Top exhaust |
|Exhaust Ducting Diameter(mm) ||250 |
|Exhaust fan power ||750W |
|Preheating Mode ||IR emitter |
|Control Mode ||PID |
|Preheating Zone Number ||2 |
|Preheating Length(mm) ||1500 |
|Preheating Temperature ||Room temperature~200°C |
|Warm-up Time(min) ||Approx.12min(setting:150°C) |
|PCB Width(mm) ||50-300 |
|Conveyor Direction ||L-R(Option:R-L) |
|Conveyor Speed(mm/min) ||500-1800 |
|Conveyor Height(mm) ||750±20 |
|Available Component Height(mm) ||Top: 120, Bottom: 15 |
|Conveyor Speed Control Mode ||Closed loop |
|Fingers of solder dip machine ||Heavy duty double hook Type, Light duty double-hook Type |
|Conveyor Angle ||4~6° |
|Type of solder Pot ||Motor drive |
|Solder Pot Material ||Casting Iron |
|Wave Height Adjustment ||Digital Control by PC |
|Cooling Method ||Air Cooling |
|Heater Power ||220V 9KW |
|Solder Pot Temperature ||300°C |
|Solder Pot Capacity ||350KG |
|Wave Drive Power ||180Wx2 3PH 220 VAC |
|Solder Pot Warm-up Time ||Approx.150min(setting: 250°C) |
|Control Mode ||PID |
|Finger Cleaning System ||Brush |