SZ-101U Axial IC Lead Cutting IC Manual Forming Machine
- SunzonTech Axial IC Lead Cutting IC Manual Forming Machine.
- Form The Component In U Type Before THT And DIP Process.
- Cheap Solution To Cut Lead Of IC And Forming.
- Applicable To Taping Resistors, Diodes And Other Axial Components To Form And Cut Lead.
- The Forming And Cutting Of The Feet Is Completed At One Time The Forming Span And Length Can Be Adjusted.
- Easy To Adjust And Operate Suitable For Mass Production.
- High Economy Saving Time And Effort.
- The Machine Is Manual, No Power Supply Required, Low Cost.
SunzonTech Axial IC Lead Cutting IC Manual Forming Machine To Form The Component In U Type Before THT And DIP Process. It can manually cut and form the component in exact size for DIP/ THT process. Below you could find the specification range of our machine ability.
| Axial IC Lead Cutting IC Manual Forming Machine | |
| Model | SZ-101U |
| A | 6-40 |
| B | 3.6-15 |
| C | 1.2MM |
| D | 1.5-8 |
| W | 0.35-1 |
- Applicable To Taping Resistors, Diodes And Other Axial Components To Form And Cut Lead.
- The Forming And Cutting Of The Feet Is Completed At One Time.
- The Forming Span And Length Can Be Adjusted.
- Easy To Adjust And Operate Suitable For Mass Production.
- High Economy Saving Time And Effort.
- The Machine Is Manual, No Power Supply Required, Low Cost.
Please check dimension before ordering. The distance data between two components are required for Axial IC Lead Cutting IC Manual Forming.
Any technical questions please contact sales@sunzontech.com
